Galvanized Steel Roller Shutter Door Roll Forming machine 15 - 18 m
/ min
Description:
This Galvanized Steel Roller Shutter Door Roll Forming Machine uses galvanized steel sheet, colored armor
plate or aluminum plate as the material plate. The products
produced by this machine are bright in colored, against fading,
resistant to rust, and be widely used in shops, working
departments, warehouses, and fire partition. Its strength is three
times higher than aluminum alloy door.
Main teachnical parameters:
Suitable process material: aluminium /galvanized/colored steel
Material Thickness:0.8-1.2mm
Yield strength 245Mpa or 550Mpa
Machine Components:
| Decoiler | 1 set |
| Main forming machine | 1 set |
| Hydraulic Cutting device | 1 set |
| PLC Control System | 1 set |
| Exit Rack | 2 sets |
Working flow:
Decoiler-Level device-Main forming machine-Hydraulic cutting-Run
out table
Machine Parts:
Details about the shutter door machine:
1)Decoiler:
Max. feeding width: 500mm, coil ID range 470mm±30mm
Manual/Automatic for option
Capacity: Max. 3Ton or as you require
2) Cold Rolling Mills
Rollers manufactured from bearing steel GCr15,precision
machined,hard Chrome Coated with thickness 0.04mm(for longer life
and anti-rust) ;
Motor Driving,Gear chain transmission, 16 forming stations and 7
rollers(3 upper rollers and 4down rollers)for straightening and
levelling)
Main Motor=5.5KW , Frequency speed control
Forming speed approx.15-18m/min
3)Hydraulic Cutting device
hydraulic motor: 2.2KW, Hydraulic pressure range: 0-16Mpa
Cutting tool material: Cr12, Heat treatment
4)PLC Control System
(Touch screen brand:Taiwan WEINVIEW,Inverter brand:Finland
VOCAN/Denmark Danfoss ,Encoder brand: Japan Koyo)
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Cut-to-length tolerance≤±1mm
Control Voltage 24V
5) Exit Rack Un-powered
The steel roll shutter door are popular and used for factory,
warehouses, stores. Feel free to contact us.
After-sale service:
1 . Installation and training of roll forming machine:
a . If buyers visit our factory and check the machine, we will
teach you how to install and use the machine, and also train your
workers/technician face to face.
b . Without visiting, we will send you user manual and video to
teach you to install and operate.
c . If buyer needs our technician to go to your local factory,
please arrange board and lodging and other necessary things.
2 . After Service of roll forming machine:
a . One year guarantee for whole roof forming machine.
b . 24 hours technical support by email or calling
c . If there is any problem found of the roof forming machine, we
will repair it for free in one year.
