This production line is used for coil with different
specifications, through uncoiling, leveling and cutting to length
to flattened plate as needed length and width.This line is composed
of coil car, double support uncoiler, pre-leveler, finish-leveler,
length gauge, cut to length machine, stacker, servo driven system,
etc. as well as pendulum middle bridge, pressing and guiding device
and steering device.
1. Application material: Cool rolled steel
2. Tensile strength: σb≤450Mpa;
3. Yield strength: σs≤245Mpa;
4. Material thickness: 0.5-2.5mm(Max.)
5. Material width: 700-1250mm(Max.);
6. Rolled coil inner dia.: 508mm;
7. Rolled coil outer dia.: 800-1500mm(Max.)
8. Weight of rolled coil: 10 T(Max.)
9. Finished products parameter:
10. Specified length :500-3000
11. Tolerance of diagonal line: ±1.5mm(L≤2000mm)
12. Tolerance: L=±1.0mm(L≤2000mm)
Other technical parameter:
Power supply: 380V/50Hz/3Ph
Linear speed: 80
Power capacity: approx.: 80KW
Stacking height;350 mm
Stacking weight:5T
Compressed air: pressure P= 0.8mpa
Cover area for production line: approx.: 28m*8.5m
Unit direction and line elevation:
(1) Direction of the unit is from right to left (facing the
operation platform);
(2) Operating height line: +800mm.
Standard equipments of machine:
| 5 tons hydraulic un-coiler | 1 |
| Guiding equipment | 1 |
| Slitting equipment | 1 |
| Cutting equipment | 1
|
| Hydraulic stations | 2 |
| PLC control panel | 1 |
| Support tables | 2 |
| Spare parts | 1 wooden tooling box |
Production line’s equipment configuration and function description:
Transverse liner: coil→ feeding → unwinding → feeding →
pre-levelingl machine → looping → correction →precise leveling
machine → measurement → shearing machine → stacking.
What is the difference with our standard cut to length and
economical one?
Compared with standard cut to length, the economical type does not
have 1) hydraulic guiding-pressing, shovel-head, pinch and feeding
device
The user must use crane to lift and guild the sheet head to the
leveling unit
2) hydraulic swing beam shearing machine: QC12Y-6X2000
The user must use manual plasma cutter machine to cut the sheet.
Communication with customers
A: How to cut sheet with one side small width and one side big
width sheet by this machine?
B: First, there is a double edge slitting unit, it is for slitting
scrape edge of the hot rolled steel plate to get the exact width
for light pole, and then we can use our taper slitting unit to cut
the steel sheet into 2 pieces with one side small and one side
bigger sheet. There is a dolly in the front of the slitting unit.
It is for control the taper cutting degree. By change the position
of the stopper on dolly to control the taper slitting rate.
A: How many models do we have for cut to length?
B: We have three kinds, 6X1600-12meters(the max cutting length is
12meters), 6X1600-14 meters(max 14 meters) and 6X1600-16 meters(max
16 meters)
A: How long is your quality guarantee period
One year. And when the machine arrives at customer workshop, we
will send engineer to commissioning machine and give training. But
also, the client can let their engineer to our workshop to study
before delivery.
