Ductwork Aluminum foil material PU sandwich panel continuous
production line
Aluminum foil PU sandwich panel line is an automatic production
line,which is consisting of decoiler,film coating,pre-cutting
equipment,roll forming machine
system,preheating,foaming,solidification,band saw
cuttinig,cooling,stacking and packiang.The whole line integtates
technologies of mechanics,chemistry,eletrical control,hydraulic
pressure pneumatic and temperature control.
Features
1. Beautiful and applicable,multiple functions,such as thermal
isolation,sound isolation and flame retardence.
2. Using heated air recycle oven,strictly control the temperature
of PU foaming and solidification in suitable range.
3. Using high pressure foaming system,precise measurement,high
stabilith,little dust in locale,protect the worker's health.
4. Using 141B Or C5 as foaming agent.Insted of carbon
chloral-fluoride,make the PU foaming treatment treatment become
environmental production crafe.
5. Special double belt cojveyor,flat surface of sandwich panel,even
thinckness,anti-patter n.
6. Operation system controlled by PLC computer,personal design and
simple operation.
Plate type figure
Technical parameter
| Item | Parameter |
| Material | Type | Color steel sheet;galvanized sheet;Aluminum sheet |
| Thinckness(mm) | 0.4-0.8 |
| Width(Mpa) | ≤1250 |
| Suitable size of panel | Length(mm) | 2000-16000 |
| Width(mm) | 600-1200 |
| Thickness((mm) | 30-200(Not including height of corrugation) |
| Production speed(m/min) | (Adjustable)3-8 |
| Valid length of double belt conveyor(mm) | 16000-36000 |
| Work pressure on pouring foam(Bar) | 150-200 |
| Total power(kw) | Abouot 300 |
| Total size(Length×Width×Height) | 130000×15000×6000 |
Manual decoiler | 1).Material coil inner diameter: 450mm-550mm 2).Outer diameter:1500mm 2).Max coil width:1250mm 3).Carrying capacity: 5T |
Forming device | 1)Shaft material:high grade No.45 steel after treatment 2)Out diameter is80 mm 3)Roller material: 45# steel polished and coated with chrome
HRC55-60° 4)Forming speed:8-15m/min 5)Main motor power:3 kw 6)Roller station:16stations 7)Coil width: 1000/1200/1250mm 8)Effective width:950/1150mm 9).Voltage:380v,50Hz,3 phase |
Hydraulic cutter | 1). material of blade: Cr12 mould steel with quenched treatment
55-60°C 2). cutting system: adopt advanced hydraulic drive, after forming
automatic cut, no distort, no wasting , high safe factor.(main motor stop cutting) |
Control system | 1.)Type: PLC Frequency Control System with touch screen
2).PLC Brand: Delta 3).Encoder Brand: Omron 4).Screen: Delta test screen 5).Automatic length and quantity measurement 6).Control station is used to control product length and quantity,
automatically cutting to length and stop when required quantity is achieved. 7).Length Error: ±2mm, error is easy to adjusted. |
| Outpur table | It is simple and used to load finished product. Length:6m |
Spare Parts | 1).Easy damaged parts: conk 2 pcs, fuse-link 4 pcs 2).Rubber mat 1 pcs; 3).Bolt spanner 1 pcs |
