1.0 - 2.5 mm thickness cable tray making machine with 18 m / min
forming
Description:
Our cable tray forming machine has many advantages of stablity,
efficiency, material saving, low noise. And our machines work
within high speed which improves its productivity greatly. Besides,
Its products have high quality and fashionable styles. Cable trays
are used as an alternative to open wiring or electrical conduit
systems, and are commonly used for cable management in commercial
and industrial construction.
Technical Parameters:
5 ton hydraulic De-coiler Diameter: 420-560mm hydraulic expansion.
Pictures for reference
Expansion: Hydraulic de-coiler
Capacity: 5000kg per mandrel
Max Coil Width: 1250mm
Leveling device 1.7 rolls leveling, 3 rolls up and 4 rolls down
2.Diameter is Ø 80mm, chrome and HRC60 heat treatment to secure the
smooth surface
3.Leveling Raw Material thickness:1.5-2.5mm
4.Max Leveling Raw Material width: 1000mm
Feeding device Feeding Servo feeding motor: about 4.4KW,Yaskawa
Description: servo feeding can control the punching distance in
precision, controlled by PLC, and the feeding tolerance can
be+-0.05mm, the servo motor can control the speed, and can accept
the input signal, and react quickly, and performance well, the
touch screen can display the rotating speed, the length and the
quantity, it can be controlled by the manual and auto modes.
Punching press machine Brand name: Yangli or as you require
Main roll forming machine Suitable Plate Material:Material
thickness:1.0-2.5mm
Raw material: Galvanized steel and black steel sheets
Working Speed: 18 meters / min
Forming Steps: 20 stations
Material of Roller: Gcr15, Quench HRC58-62 Plated Chrome
Material of Shaft: 45# Advanced Steel (Diameter: *90mm), thermal
refining
Driven system: chain driven, shafts diameter 90mm
Main Power with reducer: 18.5KW WH Chinese Famous
Cutting: Hydraulic Cutting Cr12mov
Material of Cutting Knife: Cr12Mov, Quench HRC58-62
Hydraulic Station Power: 7.5KW Wuxi Wanshen Famous Chinese Brand
The whole machine is controlled by industry computer-PLC.
Adjust the height by the motors and the rails, controlled by the
PLC
Hydraulic cutting system The cutter blade material: Cr12mov
HRC58-62 degree
Cutting after forming: Cut the sheet after roll forming to required
length
Cutting motion: The main machine automatically stops and the
cutting will take place. After the cutting, the main machine will
automatically start.
Material of blade: CR12with heat treatment
Length measuring: Automatic length measuring
Tolerance of length: 6m+/- 1.5mm
Control panel (1) Power supplier: 380V, 50 Hz, 3Phase (adjusted
with the requestment)
(2) Length & quantity measurement automatically;
(3) Length & quantity controlled by PLC
(4) Length inaccuracy can be amended easily.
(5). Control panel: Button-type switch and touch screen
(6) The language in the touch screen: English and Chinese
(7) Unit of length: millimeter (switched on the control panel)
Working flow:
Uncoiler—Feeding—Leveling—Punching—Roll forming—Hydraulic
cutting—Output table
